I migliori router WiFi con velocità gigabit nel test (2022) (2023)

FAQs

Why is my WiFi router not fast enough? ›

It might be because of an outdated router or a less-than-ideal router location. You might be able to solve slow speeds with an easy fix, like upgrading to a mesh network (which also has to be set up in the right spot) or simply restarting your modem and router.

The quickest, easiest, and most painless way to gauge your WiFi speed is to use a free, browser-based test like the one offered by Internet metrics company OOKLA at Speedtest.net. With about 8 billion tests under its belt, OOKLA has more data to back speed comparisons than any other tester out there.

One way to check is to use an Ethernet cable to connect a computer or laptop directly to your modem. If performance is noticeably better than when using Wi-Fi at close range in the same room, then you've likely identified your problem.

Check Your Router

Just like with your devices, your speeds will only be as fast as your router and Wi-Fi signal will allow them to be. If you know your router can support gigabit speeds, but you're not getting the signal strength you should be, try troubleshooting it.

For the best signal, put the wireless router out in the open on the main floor of your house, away from walls and obstructions. Ideally, you'll want to position it off the floor, above the furniture. Keep it away from other electronics that might cause interference, like microwaves, baby monitors, and cordless phones.

An internet speed of at least 25Mbps is good for Wi-Fi. That will make sure that multiple people get adequate bandwidth on your Wi-Fi network while multiple devices are being used at the same time. For larger households, a speed of 100Mbps is even better.

A router doesn't increase the speed of your internet connection. A 100Mbps plan remains as a 100Mbps plan, and there's nothing you can do or add to increase your speed outside upgrading to a faster plan.

Using heat map software can help you maximize your wireless coverage, and buying a more expensive router might give you better range, but it still doesn't mean the signal will reach the far corner or your basement.

Does more router mean faster internet? ›

Routers can affect internet speed and are responsible for processing and managing every device on your home network. A quality, new router can help maximize your internet speed, while an older one can slow down your connection.

As a rule of thumb, a Netgear representative told us, consumers should consider replacing their router after three years, and representatives from Google and Linksys said a three-to-five-year window was appropriate. Amazon, which owns the popular Eero brand of routers, put the range at three to four years.

Even if your original router was installed by a technician, you'll be able to change from one router to another on your own. Although all routers are slightly different, these steps will give you a general idea of the process. Purchase or lease a new router. Select a router or combined router and modem.

The average lifespan of a wireless modem router is about five years. A router can very well still be functional even if it is more than five years old but is most likely missing features that the new routers have that can improve speed and productivity.

Router with a Gigabit Ethernet WAN port or faster. Router with Wi-Fi 6 for Gigabit wireless connectivity. A computer with a Gigabit Ethernet port (or faster) or a USB 3 port (paired with a compatible adapter) Gigabit Ethernet (or faster) adapter for mobile devices (for wired connectivity)

Can you get gigabit speed over Wi-Fi? Yes, you can get gigabit speed over Wi-Fi. You just need to make sure that you have a gigabit internet connection and an up-to-date wireless router that supports gig internet speeds.

So, ultimately the answer is, yes–unplugging your router can improve Internet speeds from their current state. However, no, it will not improve your overall bandwidth or data caps. Contact your service provider if you feel you're not getting the speed you're paying for.

What is the fastest Wi-Fi router speed? The fastest routers on the market transfer data at the rate of 11,000 megabits per second under optimum lab conditions. Three of our recommendations reach these speeds: the ASUS ROG Rapture GT-AX11000, NETGEAR RAXE500, and NETGEAR RBKE963.

Do I need a faster modem or router? ›

If you have a high-speed fiber-optic connection, you may need a newer modem-router combo that can handle that type of connection. On the other hand, if you only have a slow DSL connection, and you don't need to connect wirelessly, a standalone modem may be all you need.

Buying a new modem can offer faster, more reliable Wi-Fi. It can also be the answer if you're experiencing frequent drop-outs. But it probably won't speed up your physical internet connection.

How much should I spend on a router? It depends on what you need and how many people and devices need to connect, but a small- to medium-sized home or apartment can probably get by with a well-tested dual-band router in the $100 range.

You should rent a modem or router (or both) from your internet provider if you want upgrades, replacements, and technical support at no additional cost to you. If you want to save money over the long run and have more control over your internet connection, buy your own router.

While the short-range speeds and security features were not the best in the price range, the router manages to get all the basics right. RAX43 is a decent WiFi router with Netgear's reliability and performance. Recommended under $150!

What's worse, hackers can then use it, along with thousands of other hijacked routers, to launch malicious cyberattacks on organizations and their websites and networks. If your firmware is out of date, your router could be hijacked in this way and there's a good chance you wouldn't even know it.

Updating and/or upgrading your wireless router/network on a regular basis can make your network quicker to respond to requests, have less drops or disconnects, and increase the range of your network Wi-Fi.

A router reset will allow you to set it from scratch where it will work at optimal levels. Do this when you feel you're having issues with your network or after you've upgraded your internet speed and don't seem to get the speed that you're supposed to get.

Do routers get weaker over time? ›

Old routers typically use less efficient technology and may even develop technical issues, such as overheating problems, that result in poor signal strength.

Andreas Grant, a Network Security Engineer at Networks Hardware strongly recommends leaving it on, too. 'Your Wi-Fi router doesn't require rest like other devices. It is designed to be working 24/7 and that's every single day of the year.

In general, routers can and do fail. The primary cause of failure for consumer grade equipment is heat stress. Most consumer grade hardware runs far too hot and have respectively poor air cirulation compared to their ventilation needs.

Unplug your old router. (If your old router is combined with your modem, you will need to go into its settings to disable the Wi-Fi network there.) All your devices should now automatically connect to your new router using the same network name and password. Verify your devices are working properly.

Most Internet providers allow you to purchase your own modem and router separately, or a device that contains both—it's up to you. Both options connect you to the Internet. Keep in mind that if you purchase a combined device, if one part breaks (i.e., the router or the modem) you will have to replace the entire system.

You can replace your WiFi router without calling your ISP. However, if you will be replacing the cable modem, you will need to call your ISP for them to register the new cable modem.

A modem is a box that connects your home network to your internet service provider, or ISP. A router is a box that lets all of your wired and wireless devices use that internet connection at once and allows them to talk to one another directly.

If you're connecting to the internet over wi-fi, the download speed on individual devices may be slower than 500Mbps. This is often due to poor wi-fi or congestion from other networks. This will stop you from getting the full potential of your broadband service.

Getting that secure, high-speed 900 Mbps or better Wi-Fi boost isn't difficult. It does requires scoping out three elements of your WiFi: age and capabilities of your wireless equipment; measuring your current wireless router speeds and adding WiFi Network Extenders along with your existing Wi-Fi router.

The only way to achieve a 270 or 300Mbps connection is to get a router that supports 5GHz wide band. I don't know if it's a hardware limitation or a driver restriction, but with Mac notebooks, you just can't take advantage of 2.4GHz wide band, so you'll never get more than 130Mbps.

What is the max speed for 2.4 Ghz? ›

Using the latest Wi-Fi standard and the best router, 2.4 GHZ Wi-Fi can reach up to 600 Mbps under absolutely ideal conditions. But for your average home network, a max speed of 150 Mbps is more likely from a 2.4 GHz Wi-Fi connection.

A 500 Mbps internet connection offers download speeds of up to 62.5 MB/s (megabytes per second). In terms of download time, this means that a 100 GB file can be downloaded within 27-35 minutes. To put it into perspective, an average 4K movie (approximately 20-22 GB) can be downloaded within 5-6 minutes.

Gigabit-level service provides speeds around 900 megabits per second, so an extended family (up to 12 people) could stream 4K content to each of their own devices at the same time and still stay under that limit.

Can you get gigabit speed over Wi-Fi? Yes, you can get gigabit speed over Wi-Fi. You just need to make sure that you have a gigabit internet connection and an up-to-date wireless router that supports gig internet speeds.

Do routers affect internet speed? Routers can affect internet speed and are responsible for processing and managing every device on your home network. A quality, new router can help maximize your internet speed, while an older one can slow down your connection.

The 2.4GHz band is the slower of the two, having a maximum bandwidth of 300Mbps. On the other hand, the 5GHz band provides a maximum bandwidth of just under 7Gbps per second.

300 Mbps provides a download speed of 37.5 Mb per second.

This might not seem like much time, but consider that you have multiple employees on multiple computers all doing similar tasks at the same time. Files and data can slow during high peak-use periods if your service is not meeting your needs.

On the 2.4ghz band, you can connect up to 11 devices depending on the bandwidth usage of the device. However, each device can use different amounts of bandwidth so we don't advise connecting 11 devices at once as speed and performance can suffer.

What is the highest Wi-Fi speed? ›

Fastest internet provider FAQ

Xfinity provides the fastest home internet speeds—6,000 Mbps—for a major ISP. This Gigabit x6 plan will cost you a whoppin' $299.95 per month, though, so you might consider saving some cash by going with its cheaper 1,000 Mbps internet plan, which is only between $60.00 and $70.00 a month.

Basic Service = 3 to 8 Mbps. Medium Service = 12 to 25 Mbps. Advanced Service = More than 25 Mbps. Mbps (Megabits per second) is the standard measure of broadband speed.

If you want better range, use 2.4 GHz. If you need higher performance or speed, use the 5GHz band. The 5GHz band, which is the newer of the two, has the potential to cut through network clutter and interference to maximize network performance. Which means this band will be better for things like reducing game lag.